Ensoniq ASR-10 SCSI Hard Drive Emulator,3316 sounds,2nd card option w/2985 sound

Description

This is an external SCSI Hard Drive Emulator for an Ensoniq ASR-10, ASR-10R (rack), and ASR-88. Think of it as a Solid State Hard Drive, or SCSI Card Reader/Writer. It uses a 8GB micro SD Card for memory. This package includes the external SCSI Hard Drive Emulator with a DB25M connector, 8GB formatted micro SD card, a 3' DB25F to DB25M SCSI cable, external power supply, a 6' USB to micro USB cable, ASR-10 SCSI Manual.pdf (emailed to you), and my "ASR-10 SCSI Emulator Guide". Everything you need is included!
Your ASR-10 MUST have a SP-3 SCSI Board installed. If there's a DB25 SCSI connector on the back, you have a SCSI Board. If there's a blank panel that's labeled SCSI, you don't have a SCSI Board.
I have "configured" the Emulator Board for an ASR-10. Its set-up as 4 SCSI ID#'s with 2GB for each ID#, total of 8GB of storage. You can re-configure it if you want, with the included USB to micro USB cable. The Emulator Board is "hot-swap", so you can change the 8GB micro SD card without powering down the ASR-10.
The SCSI Emulator Board has no moving parts like a SCSI Hard Drive, so it's completely silent and should last forever. I use this Hard Drive Emulator with my ASR-10's and it works perfect. The SCSI Emulator Board has active termination and the SCSI ID#'s are set to ID# 0, 1, 2, and 5.. I will change the SCSI ID#'s if you want to different ID#'s, let me know before the package ships.
Each 2GB partition of the 8GB micro SD card has been formatted in the Ensoniq format, OS 3.53 copied to the card, and the directories set-up. You can Boot the ASR-10 from the Emulator, load and save your samples, sequences, etc, at SCSI speed.
SCSI ID#'s; Every SCSI device in a SCSI chain must be set to a different ID#. Ensoniq's internal SCSI ID# is 3. I set-up the SCSI ID#'s as ID# 0, 1, 2, and 5. ID# 4 is best if you use a SCSI CD-ROM drive with the ASR-10. I left SCSI ID# 6 available, in case you use a Zip drive. If you want me to set-up the SCSI ID#'s in a different way, let me know when you purchase the emulator.
The included external 5V USB power supply is the US, UK, UE, or AU wall style adapter, but will work in any country in the world. Its a switching adapter that uses 100-240V, 50-60 Hz. I have all 4 adapters in stock and will ship the correct one for your country.
The case in the picture is black. The case that you will receive may be black, grey, or clear, depending on which color I have in stock.
SCSI Cables;
The SCSI connector on an ASR-10 is a DB25F. The SCSI connector on the Emulator is a DB25M. You will be shipped a 3 ft DB25F to DB25M SCSI cable.
This item is only for the ASR-10, ASR-10R, and ASR-88. I also sell other items for Ensoniq's in my Ebay Store, SynthPlus.
The ASR-10R in the picture is not included!
Email me with any questions.
I have setup directories and sub-directories, and saved 3316 Ensoniq sounds to the 1st 8GB micro SD card that's included. All of the sounds from Ensoniq CDR-1 through CDR-16 are on the 1st micro SD card (3316 sounds). I now have a 2nd 8GB micro SD card as an option for more. All of the sounds from 7 more Ensoniq CD's are on the 2nd micro SD card (2985 sounds); Ensoniq SCD-1, SCD-2, SCD-4, Master Violin Library, CyberSounds, Ultimate ASR-10, and ASR-10 Rock Keys. You will receive documentation to show you how to navigate the directories. On the 2nd 8GB micro SD card, SCSI ID# 2 (2GB) is left empty so you can save your own sounds, sequences, songs, effects, etc. to the card.