-40%
Simpson Strong-Tie CD25114RC Crimp Anchor Round Coupler for 1/4
Simpson Strong-Tie CD25114RC Crimp Anchor Round Coupler for 1/4
Simpson Strong-Tie CD25114RC Crimp Anchor Round Coupler for 1/4

Simpson Strong-Tie CD25114RC Crimp Anchor Round Coupler for 1/4" Rod 100 Per Box

$ 19.51

Availability: 100 in stock
  • Head Style: Mushroom Head
  • Rail Height: 1 1/4 in
  • Type: Business & Industrial
  • Model: CD25114RC
  • Restocking Fee: No
  • Brand: Simpson Strong-Tie
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • MPN: CD25114RC
  • Condition: Came out of a hardware store that closed downMay be repacked for shipping and not come in the original box
  • Box Quantity: 100
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Material: Zinc

    Description

    Simpson Strong-Tie CD25114RC Crimp Anchor - Round Coupler for 1/4" Rod 100ct
    Specifications:
    Anchor Diameter:
    1/4"
    Anchor Length:
    1-1/4"
    Anchor Material:
    Zinc
    Anchor Head Type:
    Mushroom Head
    Requires 3/16" Drill Bit
    The crimp anchor is an easy-to-install expansion anchor for use in concrete and grout-filled block. The pre-formed curvature along the shaft creates an expansion mechanism that secures the anchor in place and eliminates the need for a secondary tightening procedure. This speeds up anchor installation and reduces the overall cost.
    Drill a hole using the specified diameter carbide bit into the base material to a depth of at least 1/2" deeper than the required embedment.
    Blow the hole clean of dust and debris using compressed air. Overhead application need not be blown clean. Where a fixture is used, drive the anchor through the fixture into the hole until the head sits flush against the fixture.
    Be sure the anchor is driven to the required embedment depth. The rod coupler and tie-wire models should be driven in until the head is seated against the surface of the base material.
    Warning
    Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, with the exception of the duplex anchor, use these products in dry, interior and non-corrosive environments only.
    :