Stainless Steel Rod Linear Shaft Rods Metric Round Bar Ground 400mm Length

Description

Stainless Steel Rod
Product name: 303 stainless steel
Standard: GB/T 1220
303 stainless steel is an austenitic free-cutting stainless acid-resistant steel.
In order to improve the performance of the steel, no more than 0.60% of molybdenum is
added to the steel to resist ablation.
The mechanical properties of 303 stainless steel are 515MPa tensile,
205MPa yield and 40% elongation after annealing and stress relief.
The standard hardness of stainless steel 303 is HRB 90-100, HRC 20-25,
YUNSHUONote: HRB100 = HRC22.9
303 is a free-cutting stainless steel containing sulfur and selenium,
respectively, and is mainly used in applications requiring free-cutting
and high surface finish. 303 stainless steel improves cutting performance
and high temperature bonding performance. Suitable for automatic lathes, bolts and nuts
●Chemical composition:
Carbon C: ≤0.15
Silicon Si: ≤1.00
Manganese Mn: ≤2.00
Sulfur S: ≥0.15
Phosphorus P: ≤0.20
Chromium Cr: 17.00～19.00
Nickel Ni: 8.00～10.00
Molybdenum Mo: can be added ≤0.60
This listing contains the bar diameters of 2mm, 2.5mm, 3mm, 3.5mm, 4mm,
4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm,
10mm , 10.5mm , 11mm, 11.5mm, 12mm, 12.5mm, 13mm, 14mm, 15mm, 16mm, 1
7mm, 18mm, 19mm and 20mm.
Name
Stainless Steel Rod
Material
303 Stainless Steel
Available Diameter
2mm, 2.5mm, 3mm, 3.5mm, 4mm,4.5mm,etc
Length
400mm
Package: 1pc bar
Hello, we provide diameters 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm,
8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5 mm, 13 mm, 14 mm, 15 mm, 16
mm, 17 mm, 18 mm, 19 mm and 20 mm (excluding size) Please provide us with a quotation, or you
can choose a close size, for example, you Like 4.5mm, so you can choose 5mm
These are available in lengths 400mm and there are various pack quantities available.
Please select required bar diameter and length using the drop down menus at the top of the listing
The tolerance for the silver steel bars are up to 25mm +0/-0.015", and over 25mm +0/- 0.025"